If the output of black fungus is very large and it is urgent to dry it, we need to use a black fungus dryer, because in this case, it is too late to dry it, so the black fungus will deteriorate, and it will cause a lot of losses. Guoxin Machinery has been focusing on drying for 12 years, and its excellent drying technology has won the trust of many drying customers.

Guoxin net belt black fungus dryer adopts a net belt structure. This drying equipment realizes the mass production line mode of black fungus drying. The overall fully automated operation effectively improves the drying efficiency of black fungus and saves time and cost. It can not only meet the needs of customers to dry their own black fungus, but also dry the black fungus of surrounding farmers.

Process of drying black fungus using the black fungus drying machine of Guoxin:

Set the operating parameters of the black fungus drying machine. During the whole process of drying black fungus, it should be noted that the low temperature of 35-45 degrees is mainly used for dehumidification in the first stage, because the moisture content of fresh black fungus is very high. In the middle stage, the temperature can be appropriately raised to 50 degrees for heating and dehumidification. In the later stage, the moisture content of the black fungus decreases and the temperature can be appropriately raised to 55 degrees. After more than ten hours of continuous drying and dehumidification in the black fungus drying room, the black fungus is dried.